s i s t e m a o p e r a c i o n a l m a g n u x l i n u x | ~/ · documentação · suporte · sobre |
Next
Previous
Contents
6. Appendix B. - SCSI reference implementation RAID54 disk SCSI RAID5 df Filesystem 1k-blocks Used Available Use% Mounted on /dev/md0 11753770 2146076 9000678 19% / /dev/md1 15739 885 14042 6% /boot # -------------------------- fdisk -ul /dev/sda Disk /dev/sda: 64 heads, 32 sectors, 4095 cylinders Units = sectors of 1 * 512 bytes Device Boot Start End Blocks Id System /dev/sda1 32 32767 16368 fd Linux raid autodetect /dev/sda2 32768 292863 130048 5 Extended /dev/sda3 292864 8386559 4046848 fd Linux raid autodetect /dev/sda5 32800 260095 113648 82 Linux swap /dev/sda6 260128 292863 16368 83 Linux native - test # ------------------------ fdisk -ul /dev/sdb Disk /dev/sdb: 64 heads, 32 sectors, 4095 cylinders Units = sectors of 1 * 512 bytes Device Boot Start End Blocks Id System /dev/sdb1 32 32767 16368 fd Linux raid autodetect /dev/sdb2 32768 292863 130048 5 Extended /dev/sdb3 292864 8386559 4046848 fd Linux raid autodetect /dev/sdb5 32800 260095 113648 82 Linux swap /dev/sdb6 260128 292863 16368 83 Linux native - test # ------------------------ # fdisk -ul /dev/sdc Disk /dev/sdc: 64 heads, 32 sectors, 4095 cylinders Units = sectors of 1 * 512 bytes Device Boot Start End Blocks Id System /dev/sdc2 32 292863 146416 5 Extended /dev/sdc3 292864 8386559 4046848 fd Linux raid autodetect /dev/sdc5 64 260095 130016 83 Linux native - development /dev/sdc6 260128 292863 16368 83 Linux native - test # ------------------------ fdisk -ul /dev/sdd Disk /dev/sdd: 64 heads, 32 sectors, 4095 cylinders Units = sectors of 1 * 512 bytes Device Boot Start End Blocks Id System /dev/sdd2 32 292863 146416 5 Extended /dev/sdd3 292864 8386559 4046848 fd Linux raid autodetect /dev/sdd5 64 260095 130016 83 Linux native - development /dev/sdd6 260128 292863 16368 83 Linux native - test # -------------------------- # raidtab # raiddev /dev/md0 raid-level 5 nr-raid-disks 4 persistent-superblock 1 chunk-size 32 # Spare disks for hot reconstruction nr-spare-disks 0 device /dev/sda3 raid-disk 0 device /dev/sdb3 raid-disk 1 device /dev/sdc3 raid-disk 2 device /dev/sdd3 raid-disk 3 # boot partition # raiddev /dev/md1 raid-level 1 nr-raid-disks 2 persistent-superblock 1 chunk-size 32 # Spare disks for hot reconstruction nr-spare-disks 0 device /dev/sda1 raid-disk 0 device /dev/sdb1 raid-disk 1 # -------------------------- # cat lilo.conf.sda # GLOBAL SECTION # device containing /boot directory disk=/dev/md0 # geometry bios=0x80 sectors=32 heads=64 cylinders=4095 # dummy partition=/dev/md1 # start of device "disk" above start=32 boot=/dev/sda map=/boot/map install=/boot/boot.b image=/boot/bzImage root=/dev/md0 label=LinuxRaid read-only # ------------------------ # cat lilo.conf.sdb # GLOBAL SECTION # device containing /boot directory disk=/dev/md0 # geometry bios=0x80 sectors=32 heads=64 cylinders=4095 # dummy partition=/dev/md1 # start of device "disk" above start=32 boot=/dev/sdb map=/boot/map install=/boot/boot.b image=/boot/bzImage root=/dev/md0 label=LinuxRaid read-only
Next Previous Contents |